×

Loading...

Topic

This topic has been archived. It cannot be replied.
  • 枫下家园 / 电脑用户 / How can I configure this modem? -diao_david(LoveBeer); 2001-7-15 {322} (#133077@0)
    我的台式机里有一块内置 Modem，台湾产的杂牌，用的是 Motorola 的芯片。原先在 Win98 下能够被系统自动识别，并安装驱动。今天当我把系统升级成 Win2K Server 后，居然找不到 Modem 了。它被当成 Simple Communication Controller。但是找不到驱动。我去 Motorola 的网上看了一眼，东西实在太多。
    那位大虾能指点一下如何设置这个 Modem. 谢了。
    • thats easy, I just did it in my new win2k few days ago -guest:BigDesk; 2001-7-15 {634} (#133096@0)
      procedures:

      1- check ur COM port, usually inner modem use com3/com4, in my case, in win98 my card use com4, but when i install it in win2k, it doesnt work, so i change to use com3 (create a new com port with the win2k tool).
      2- after u setup/create ur com port and make sure it doesnt have any conliision, then use tool 'setup new device' in contral panel to add modem, and use the win2k stardard driver provider by win2k, then config it to use ur new com port.
      3- query modem in ur modem property dialog, it should give ur some modem infomation in the bottom box.
      4- u'd better restart the box, now all's done.

      good luck
      • Thank. I will try it later. -diao_david(LoveBeer); 2001-7-15 (#133307@0)
枫下论坛主坛 /  枫下家园 /  电脑用户