×

Loading...

Topic

This topic has been archived. It cannot be replied.
  • 枫下家园 / 生活杂事 / 求助:从国内带来日立888多制式录象机,和电视接上后画面老是在闪,请教各位大虾,如何处理?
    • 据我所知, 888不是真的全志士. 这里的NTSC场频60赫兹, 国内PAL制是50赫兹,不同步, 所以要闪. 我带的HD100就全没问题.
      • 有解决的办法吗?
        • no, i think.
          • 还有高手吗?
            • my hands are too low, sorry.
      • I don\
      • I do not think so, The power should be rectified and smoothed before use, and the transfomer should be shielded.
        • man, it seems that you don't know TV much. ofcz you "don't think so".
          • But at least I know his question is for a recorder instead of TV.
            • Thanks
            • What I said "TV" was “电视原理”。N制与PAL制信号场不同步造成的画面闪动跟整流滤波变压器都没有关系的。What do you at least know?
    • 察看录像机背后, 看是否有一个小开关? 50/60hz?
      • no
        • 那就没办法了,hoho...
      • I never found there exist one switch for frequency shift for appliance. A voltage exchange is enough. When you use 110, definately the f should be 60Hz.
        • You have misunderstood the problem.
          • 想哪天看看EGG大虾的风采,不反对吧?嘻嘻。
            • 真的想看吗?先看看“挥手之间”吧。
              • 啧啧,一表人材,怪不得被称为“拿摩温”。谢谢!
              • 窝喝! 哪个把人民南路的主席像搬到河头切罗?
    • 想找高手?我给你出个主意,一个字,值一千块
      换!
      • up
    • HITACHI888 is a real NTSC/PAL recorder.
      If your TV comes with A/V input jacks, you can do such thing: Using a pair of A/V cable to connect Recorder and TV. There is a select switch at the right side of front control panel of recorder. Choose NTSC (or PAL60? I can't remember it exactly, try it one by one ). Then you can get a stable image on TV ).
      • sorry, 我没有发现有那个开关。另外,型号是 888G
    • 感谢各位大侠相助。真搞笑。今天去借了盘录像带,一放,图像放像正常。停止放时电视屏幕仍旧闪动,呵呵,困扰我好几天,以为白带来了。
      • Faint, 原来里面没有录像带啊!EGG说的对,画面闪动跟整流滤波变压器都没有关系。
        • 呵呵,不是没放录像带,而是先用的从国内带来的带子。
      • 哈哈,我最近买了个刻录机,装上后拿一片跟着机器一起来的CD放进去想装软件,谁知道弄来弄去,不但刻录机读不到盘,连原来的光驱也不行了。把跳线、设置和连接线什么的折腾了半天,才猛然发现,那是张原配的空白的CD-R!puke!
        • you IQ is so HIGH!!