1. Using Hyper Terminal to connect to your modem.
2. enter, atm0 (to disable modem's speaker)
3. enter at&w0 and or at&w1(store current configuration to memory).
-songl(风);
2001-12-15(#299791@0)
in windows accessories -> communications -> hyper terminal.
-songl(风);
2001-12-15(#299806@0)
it needs me to dial first. which number should I dial?? thanks, feng.
-antmm(蚂蚁啃骨头);
2001-12-15(#299817@0)
no, select the COM port which connected to your modem, and select config, rate 9600, and 8, 1, None.
-songl(风);
2001-12-15(#299822@0)
then, after i entry atm0 and press ENTRY, it appears "OK", is that right? then how to store current configuration to memory??
-antmm(蚂蚁啃骨头);
2001-12-15(#299839@0)
yes, it's right that means your command excute successfully, then enter at&w or at&w0 or at&w1.
-songl(风);
2001-12-16(#300121@0)
but after it execute at&w0 successfully. then i use the modem, it still sound louderly. why??
-antmm(蚂蚁啃骨头);
2001-12-16(#300211@0)
I tried in my modem before I reply your note. it did work, you would try AT&W or AT&W1 or AT&W2. that's universal modem commands. let me know the outcome.
-songl(风);
2001-12-16(#300596@0)
TOSHIBA Software Modem AMR
-antmm(蚂蚁啃骨头);
2001-12-16{37}(#300683@0)
我的是手提内置modem, 不知道怎么看牌子
if you're in Toronto, give me a call, BTW, you could check your modem properity in device manager, or modem icon in control panel.
-songl(风);
2001-12-16(#300685@0)
i'm in vancouver:( is the modem properity concerned with the hyper terminal's properity?
-antmm(蚂蚁啃骨头);
2001-12-16(#300689@0)
QQ me at 39577112, 偏不信这个邪.
-songl(风);
2001-12-16(#300691@0)