you can define your own protocol for the serial communication,. normally you can send several RETURN (0x0D 0x0A) and the receive side received the RETURN then send some thing back to send side base on your protocol.
-netwind(netwind);
2001-12-18(#302224@0)
Hand shake is not needeed. be sure same boundrate, bits of one byte and stop bit at both side.
-terrydu(老杜);
2001-12-18(#302441@0)
what single board PC are you using? are you going to write some code on the single board PC?
-netwind(netwind);
2001-12-18(#302515@0)
PIC16F876 is used, I am coding for it, so I need to know how to shake with Hyper Terminal. No CTS, DTR, only three pins (TX, RX and GND) are used.
-eelvis(eelvis);
2001-12-18(#302519@0)
谢谢各位!
-eelvis(eelvis);
2001-12-18(#302522@0)
U can dowdload it at Microchip website.
-terrydu(老杜);
2001-12-18(#302539@0)