×

Loading...

sh span / sh port

avacao (吃草的大老虎白白胖胖)
Console> (enable) show span

----------------------------------------------------------
Destination Port 4/1
Admin Source Port 3/1-6
Oper Source Port 3/1-5
Direction transmit
Incoming Packets disabled
Multicast enabled
----------------------------------------------------------
Destination Port 5/1
Admin Source VLAN 2
Oper Source Port 3/1-6
Direction transmit/receive
Incoming Packets enabled
Multicast enabled
Console> (enable)
(#280439@0)
2001-11-29 -04:00
This post has been archived. It cannot be replied.
Page address has been copied. To share, click to copy page address.
Share Online by QR Code

Back To Topic: 请教各位二个CISCO问题,先谢了。 1) How to use command line to determine which port is span port on a Cisco switch? 2). How to use command line to check how may ports already used on a Cisco Switch?

Back To Forum: HOME枫下论坛枫下论坛主坛工作学习IT技术讨论