×

Loading...

Eglington: CD Changer Problem Showing Error 99

本文发表在 rolia.net 枫下论坛please find the link:
http://www.sel.sony.com/SEL/service/caraudio.shtml

the page for error 99 is as below
-----------------------------------
ws ERROR 99

The Head Unit Will Not Power On After It Has Been Installed.

What Is The Model Number And Repair Procedure Of The Receiver Installed In The Sony Ford
Focus?

Where Is The Loudness Button On The Head Unit Faceplate?

How To Connect An External Audio Source (Walkman, TV) To A Head Unit And Not Disable Unilink.

How To Install A Sony Car Stereo?


Problem Description:

What Is The Wiring Harness Plug Configuration For Sony Car Stereo Head Units?

Solution:

The following diagram provides the entire wiring harness layout.

Harness Plug Configuration

NOTE: Shown With Wires Facing Viewer
Pin Number
Wire Color
Description
1
White
Left Front Positive
2
Green
Left Rear Positive
3
Violet
Right Rear Positive
4
Grey
Right Front Positive
5
Blue/White
Amp Remote
6
Blue
Antenna Remote
7
Red
Accessory 12 VDC
8
Black
Ground
9
White/Black
Left Front Negative
10
Green/Black
Left Rear Negative
11
Violet/Black
Right Rear Negative
12
Grey/Black
Right Front Negative
13
Light Blue
Telephone Mute
14
NC

15
NC

16
Yellow
Constant +12 VDC



NOTE: The "Head Unit" is the in dash receiver unit.


Problem Description:

The Head Unit Is Displaying An E04 Message On The Display. CDX EXCD WX

Solution:

This message refers to the CD Player laser not being able to read the disc. Please try the following
steps to resolve this issue.

1.Try to playback several different discs. If the other discs play normally, the problem may be
with the original disc. Try cleaning the disc.

2.Check all wires to verify a good connection.

3.It is possible the laser pick up is dirty. Please consult with a qualified technician for cleaning.

NOTE: The "Head Unit" is the in dash receiver unit.


Problem Description:

ATT Is Displayed On The Head Unit.

Solution:

The ATT function of CDX Sony car stereo units mutes the receiver when a cellular phone call is
received. This is a normal message for the conditions described above.

If this error is displayed and a cellular telephone call is not being received, or a cellular telephone is
not installed, please contact the Customer Information Services Center at (800-222-7669) for further
assistance.

NOTE: The "Head Unit" is the in dash receiver unit.


Problem Description:

The Display Shows ERROR 99

Solution:

This error can be caused by power fluctuations received by the components.

The reset button on the modulator will need to be pressed. Please contact the system installer for
assistance in locating the modulator. After pressing this reset button, the clock and tuner presets
may need to be reset.更多精彩文章及讨论,请光临枫下论坛 rolia.net
Report